Refractory Al2O3 Alumina Ceramic Plate Intruduction:
Alumina Ceramic Plates are our main products.
Mission Ceramic is making high quality ceramic products.
We make 99.7% Al2O3 plates ,which max working temperature is 1800ºC
95% Al2O3 plates, which max working temperature is 1500ºC
We can make plates as your required sizes, special shaped can be made.
Alumina Ceramic Plate Sizes:
Thickness : 1-50mm,
Width : 20-500mm,
Length : 20-500mm.
If you need the alumina ceramic plates,please contact with us.
Technical Data
| Al2O3 Purity (%) |
Density
(g/cm3) |
Bending Strength
(Mpa) |
Expansion
(X10-6/ºC)
(25-800ºC) |
Thermal Conductivity
(W/(m.R)) |
Dielectric Strength
(kv/mm) |
Max Working Temperature (ºC) |
Water Absorption
(%) |
| 95 |
3.60 |
364 |
7.6 |
20 |
11 |
1500 |
<0.2 |
| 99.7 |
3.90 |
450 |
8.0 |
35 |
12 |
1800 |
<0.1 |
Refractory Al2O3 Alumina Ceramic Plate Our Advantage:
1.High purity: 99.7% alumina purity make sure high working temperature.
2. We can make very tight tolerance by machnning, surface polishing and glazing are available.
3.Very small and very big sized ones can be made.
4. Inspection: each single plate will be checked before shipping.
5.Low transportation cost: We have long time cooperated shipping agency, which can provide very low prices.
Refractory Al2O3 Alumina Ceramic Plate Packaging:
1. Clean plates by washing.
2. Warped with bubble plastic paper.
3. Put in wood box padded with foam board.
4. Sealed the box with screws which is easy to be opened.
5. Fragile warning stick.
Shipping Method: By sea, by Air, by express way.
Tolerance: ±0.5%-0.7%
Thickness:0.38mm, 0.5mm, 0.635mm
Property:Good thermal shock resistance,good insulation
About Our Company
Zhengzhou Mission Ceramic Products Co.,Ltd is located in Zhengzhou Advanced Al2O3 Wear Resistant Ceramic RodCity,Henan Provance. We have been focused on high quality ceramic products for years. We are providing the following materials.
1.Alumina mainly 95% to 99.7% purity.
2.Zirconia,including FSZ and PSZ, Y2O2-ZrO2,CaO-ZrO2,MgO-ZrO2 available.
3.Silicon Carbide, including SiSIC,ReSiC,NSiC,SSiC.
4.Boron Nitride(BN)
5.Ceramic Fiber products,including board,blanket,and bulk fiber.
6.Heaters,mainly Molybdenum Disilicide(MoSi2) and Silicon Carbide(SiC) heaters.
For different ceramic part,we have different processing method,including Casting,Extruding,Tape Casting,Dry pressing and ISO pressing.
If you are interest in any of our products,please let us know.I believe you will like our products and service.
Zhengzhou Mission Ceramic Products Co., Ltd
No.11 Zhengshang Road, Zhengzhou, Henan, China
Audited Supplier 
){kind=link}