Mission Ceramic provides high quality alumina ceramic rods.
Alumina Ceramic Rod is our main product.
It's mainly made by 95% and 99.7% Al2O3. Density from 3.6g/cm3 to 3.9g/cm3 .
We Can Supply Very Big Size Rods With Tight Toletance.
For other sized rods, please contact with us.
1. High temperature resistance: 99.7% Al2O3 rods can stand 1800C at most. 95% Al2O3 rods can stand 1500C at most.
2. Good abrasive resistance: 99.7% Al2O3 rods, 3.9g/cm3, 95% Al2O3 rods 3.6g/cm3.
3. Good insulating property.
4. Tight tolerance: we can grind and polish the outer surface and length. Size tolerance can be +/-0.02mm after machining.Surface roughness can reach to Ra0.2um.
5. Fast delivery, we have large quantity alumina ceramic rods and blanks in stock.
6. Inspection, each single rods will be tested before shipping.
7. Low shipping cost, we have long time cooperation with shipping company, which can provide us very low prices.
1. Extruding: Diameter from 0.8mm to 12.7mm. Max length 1800mm.
2. Casting: Diameter from 5mm to 45mm, Max length 1800mm.
3. ISO Pressing: Diameter from 10mm to 80mm, Max Length 900mm
Alumina Ceramic Rod Sizes:
|Al2O3 Purity (%)||Density|
|Max Working Temperature (ºC)||Water Absorption|
1. Clean tubes by washing.
2. Warped with bubble plastic paper.
3. Put in wood box padded with foam board.
4. Sealed the box with screws which is easy to be opened.
5. Fragile warning stick.
Shipping: By sea, by Air, by express way.
1. If any broken during shipment, we will send replacement for free or send back your payment. (In case we arrange the shipping).
2. If tolerance is not same with what we discussed, we will send replacements.
Our company has been working in ceramic industry four years. Thanks to our laborious employee and exalted customers, our enterprise is growing fast. It's our mission to provide high quality products and good service.
Our factory services
1. Consistent quality control
2. Quick delivery time
3. Excellent customer support
4. Made-to-order service available
5. various material choices
6. Own designing team for new products development.
In your inquiry, please provide as detailed imformation as you can for our evaluation.
If you are not sure what exact material you need, please tell us your requests on material performance and your specific application, according to which we will offer you the most suitable material.
Please make sure the drawing is clear with all of your technical requests so that we can quote asap.
3. Size / Volume:
If you don't have a drawing, please tell us the approx size or volume, we will offer our standard size for your reference.
The last but not the least, don't forget to tell us the quantity you need to get our best offer.